0
How much cyanuric acid does a person add for the initial setup of a 20000-gallon pool and you already added 4 pounds but can't get a reading on it?
Wiki User
∙ 8y ago
I think that it takes 4 or 5 days for added stabilizer (cyanuric acid) to register. Please be careful that you don't add too much.
A: A rough formula for CYA would be about 5#'s per 10,000 gal minimum. You should have a goal of about 50 to 80 ppm conditioner or CYA. k
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How do you keep chlorine in saltwater pool?
Once you have a chlorine reading, the use of Cyanuric Acid will help keep the chlorine from letting sunlight dissipate it. Keep in mind that many induced salywater pools manufacture chlorine from electroylsis of the salt water.
Why is my chlorine reading always low on my above ground pool even though I keep adding the recommended amount of chlorine granules?
Possibly you need cyanuric acid to stabilize the pool. Available at the pool shop. Try adding some 12.5% liq. chlor plus the above product.
What is colorimeter reading?
the reading on a colorimeter, abit obvious :S
Why is pilot reading so called?
The first reading which is obtained after end point.
Why pilot reading is not required in red-ox titration?
need of pilot reading in volumetric analysis
You cannot get rid of cyanuric acid in your pool you have drained and refilled and still have a reading of 160 Any ideas of what could be causing this high level?
Have the fill water tested.
Is high stabilizer in pool water bad?
High cyanuric acid (stabilizer) levels will give a false Total Alkalinity reading. Generally if you take your cyanuric reading and divide it by 3 and then subtract that from your Total Alkalinity reading you will get a true adjusted reading. Ex.= Cyanuric is 150ppm, T.A. is 100ppm. 150 divided by 3 is 50. Subtract 50 from 100 and your true adjusted T.A. is 50 which is far too low. Add baking soda (sodium bicarbonate) to bring the level back up to 100ppm. Try to keep the cyanuric level between 40-60ppm by checking it once a month. Using isocyanurate chlorines will elevate the level over time. When it starts getting too high, switch to a liquid chlorine diet until it comes back down to desired levels. Make sure the Total Alkalinity levels are kept in the proper range to prevent calcium hydroxide leeching of the plaster. If the walls of the pool have a slick feel but the pool does not have algae, it is probably the T.A. is too low.
What volume of Na-OH is required to flip the indicator from colorless to pink at the endpoint?
The initial reading on the buret is 10.45mL and the final reading is 40.55mL. Subtract final from initial your answer. 40.55mL-10.45mL=30.10mL
What do you already know about this subject?
pre-reading
Is there a free psychic reading service?
There are several free psychic reading services. Typically, you will be offered a free initial reading, but they hope that you would then come back to pay for more readings.
What has the author Sheila Hylton written?
Sheila Hylton has written: 'Methods of teaching initial reading'
How do you keep chlorine in saltwater pool?
Once you have a chlorine reading, the use of Cyanuric Acid will help keep the chlorine from letting sunlight dissipate it. Keep in mind that many induced salywater pools manufacture chlorine from electroylsis of the salt water.
How can you ask?
If you are reading this then you already know. (dont waste my time!)
Why is zero error not considered in spherometer?
No, you have not any knowledge about spherometer. In spherometer also, similar to other measuring instruments zero error should be considered every time; in order to achieve accurate value.
Is it true that the baby inside your womb can already read what you are reading during third trimester of pregnancy?
No, the fetus have no idea that you even are reading. They don't know what reading is.
Which active reading strategy requires you to come to a conclusion based on what you have already read and already know?
Drawing inferences
When does the Emerald Atlas Book 2 come out?
Its out already!! Happy reading!
