0
You cannot get rid of cyanuric acid in your pool you have drained and refilled and still have a reading of 160 Any ideas of what could be causing this high level?
Wiki User
∙ 13y ago
Have the fill water tested.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is high stabilizer in pool water bad?
High cyanuric acid (stabilizer) levels will give a false Total Alkalinity reading. Generally if you take your cyanuric reading and divide it by 3 and then subtract that from your Total Alkalinity reading you will get a true adjusted reading. Ex.= Cyanuric is 150ppm, T.A. is 100ppm. 150 divided by 3 is 50. Subtract 50 from 100 and your true adjusted T.A. is 50 which is far too low. Add baking soda (sodium bicarbonate) to bring the level back up to 100ppm. Try to keep the cyanuric level between 40-60ppm by checking it once a month. Using isocyanurate chlorines will elevate the level over time. When it starts getting too high, switch to a liquid chlorine diet until it comes back down to desired levels. Make sure the Total Alkalinity levels are kept in the proper range to prevent calcium hydroxide leeching of the plaster. If the walls of the pool have a slick feel but the pool does not have algae, it is probably the T.A. is too low.
If oil reading warning light is reading minimum oil how much oil do i add to my engine?
Use dipstick as a guide. Fill to proper level when engine off after it has settled/drained back to the pan.
How do you keep chlorine in saltwater pool?
Once you have a chlorine reading, the use of Cyanuric Acid will help keep the chlorine from letting sunlight dissipate it. Keep in mind that many induced salywater pools manufacture chlorine from electroylsis of the salt water.
How much cyanuric acid does a person add for the initial setup of a 20000-gallon pool and you already added 4 pounds but can't get a reading on it?
I think that it takes 4 or 5 days for added stabilizer (cyanuric acid) to register. Please be careful that you don't add too much. A: A rough formula for CYA would be about 5#'s per 10,000 gal minimum. You should have a goal of about 50 to 80 ppm conditioner or CYA. k
Causes a shift in the reading codons by one base?
A deletion causing a frame shift mutation.
Why does the salt water generator give false readings in salt water pool?
Take a sample to your local pool shop for all your readings of Free chlorine, Total chlorine, PH, Calcium, Alkalinity and Cyanuric Acids. Once you have a proper reading you will need to re-callobrate your chlorinater.
What does a hook do in an opening statement?
It draws the reader into the piece of writing, causing interest and making them want to continue reading.
Why is my chlorine reading always low on my above ground pool even though I keep adding the recommended amount of chlorine granules?
Possibly you need cyanuric acid to stabilize the pool. Available at the pool shop. Try adding some 12.5% liq. chlor plus the above product.
What are bad things about reading?
Reading too much can strain your eyes and lead to eye fatigue. It can also be isolating if done in excess, causing a lack of social interaction. Overuse of reading can lead to neglecting other important tasks or activities.
What does a Blinking temperature light mean?
Had that happen on my 94 SL2 when the ex drained and refilled the cooling system, and didn't run the car until warmed with the expansion tank cap off. The dash light started blinking, and the car overheated once. There was an air pocket in the system. Solved by running the car until warmed up with the cap off, and it burped, out went the light. If that isn't the problem, it could be a faulty CTS (coolant temperature sensor). Are there any other symptoms? Does the car overheat? Is it low on coolant? Is the gauge reading low?
Transmission keeps slipping on 200 Pontiac Sunfinre What should you check?
Check the transmission fluid level. You can only get an accurate reading on this if it is checked with the engine running and has been run for like 5 miles or so. Checking the transmission fluid when cold gives a false reading as ALL the fluid has drained into the pan.
What is causing your 1995 astro van to idle very high?
try your tps sensor . means throttle position . may be giving a false reading. /
