Want this question answered?
55ftlbs
Torque converter bolts No. Fly-wheel bolts YES.
Usually with bolts.
75.9 ft lbs
80Lbs for flywheel, 10 to 15lbs for pressure plate
You could stretch the bolts, strip the threads out of the flywheel or break the bolts off in the flywheel.
i have replaced my clutch to 10.5 diemter ,can i re use the morso flywheel/clutch bolts
Pressure plate to flywheel bolts - 24 ft/lbs
nope. you still have the 6 18mm bolts that bolt the flywheel to the crank
200 lbs plus or minus 30lbs
take the tranny out and the flywheel is right on back of the engine, unbolt the flywheel and take it off and install new flywheel with new bolts and torque them down.
torque settings flywheel bolts h100 diesel2007