Kirchoff's Current Law: The signed sum of the currents entering a node is zero.
Assume the top of the battery is a node. The current entering it (from the battery) is equal to the sum of the currents leaving it (to the branches). This adds up to zero.
The electric force that makes current flow in a circuit is related to the resistance.
a reversing key is used in the circuit to reverse the direction of current in the circuit.
Rather trying to explain all the technology that goes into battery construction, go to Related Links. All your questions will be answered there. AH means Amps Hour every battery has that term stated What it means is so many amps can be supplied for so many hours. Means amps Vs time
No, not unless it has a voltage or current regulator or series resistance to limit the current (built in somewhere).
That depends on actual circuit impedances and without knowing them cannot be answered in any way. But if all the circuit impedances are purely resistive, there will be no change in current flow with any change in frequency.
Kirchoff's Current Law: The signed sum of the currents entering a node is equal to zero. This means that the current leaving the battery is equal to the sum of the currents in the branches of the circuit.
The electric force that makes current flow in a circuit is related to the resistance.
The electric force that makes current flow in a circuit is related to the resistance.
a reversing key is used in the circuit to reverse the direction of current in the circuit.
Electrical currents require a circuit to flow. If the circuit is broken, then the electrical current will not flow. A switch is a prime example of this principle. When a switch is off, the circuit is broken. However, when it is turned, the circuit is completed and allows for the electrical current to flow through the appliance.
The current between any two points in the circuit is the voltage between those two points divided by the resistance between the same points.
No See the related link below.
A variety of techniques can be used. Node-Voltage and Mesh-current (or Loop-current) methods, for example. See related link for examples. If there is a single voltage source in the model, then find the current supplied, and Resistance = Voltage/Current. {R = V/I} You could simulate/ model the circuit on a computer then apply the power profile and a current value will be calculated. Or if you have the circuit working, Place an amp meter into the circuit and measure the current. V/i = resistance.
Rather trying to explain all the technology that goes into battery construction, go to Related Links. All your questions will be answered there. AH means Amps Hour every battery has that term stated What it means is so many amps can be supplied for so many hours. Means amps Vs time
A circuit diagram could be related to a closed circuit if the diagram is of a closed circuit.
No. Current and voltage are directly proportional to one-another and both are related to resistance by Ohm's law: V = IR or Volts = Current * Resistance So the current will depend upon the voltage and the circuit resistance by rearranging the above equations: I = V/R Meaning that the current will decrease as circuit resistance is increased if the voltage remains constant.
The function of a cell in an electrical circuit is to push the lectrons around the circuit. It can also be the source of charge in an electrical circuit.