Just remove the 4 bolts that attach it to the water pump. Remove from fan, place new one on fan (4 more bolts)
connected to your water pump.
the fan clutch is built into the water pump,it cant be separated,you have to replace the water pump.
On
fan clutch is built into water pump,u have to get new water pump.
Usually there are 4 nuts holding the clutch and fan on to the water pump shaft. Just pull the nuts, remove the fan clutch and replace it.
with your dick
Maybe try replacing the fan clutch first.
The fan clutch on a 1997 S10 has a bolt on the center of the front. Remove the bolt while holding the clutch still. There is a special tool to grab the clutch fan from the rear to hold it while removing the bolt.
in front of radiator,its connected to your fan blade.
as you are looking at the fan from the front of pickup it unscrews to the right and tightens to the left
Bad resistor or a malfunction in the switch.
There are only a few bolts holding the fan on the engine, pull it out then unbolt the clutch from the fan, replace the part and then bolt the fan back on to the engine.