Pull your liner down at the front points of rear bumper and remove the two #10 bolts....take visable bolts and clips off the bottom of cover....lift gate---open storage compartment---remove plastic clips that hold liner and remove liner---remove two black clips that hold trim plate and remove trim plate---there will be 5 #10 bolts inside holes in to remove .....pull cover off! Note: from front points of cover to gate the cover just snaps in.
easy
I have a small dent need to remove it
This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
how do i remove rear spoiler on rx330 2004 model for repainting or recoating clear coat
19.2 gal according to http://www.planetlexus.com/lexus-rx330/lexus-rx330.html
You remove the clips on the top, screws by the fenders, remove foglights if equiped and remove the bumper, install the new one in the opposite order.
Very easy. You will find 1 phillips screw on each side of the bumper cover. Remove those. There are 4 bolts size 10mm to remove. You will then have to remove plastic clips holding the bumper in place. 5 on the top and some more on the bottom. Yo also have to remove the grill. This video will walk you through the process. https://www.youtube.com/watch?v=sNBrRvy_-os
Behind / under the rear bumper there you will see 4 bolts on each side of the bumper. Have someone help you hold it while you remove the bolts. the installation is the reverse of removal.
A 2004 Honda rear bumper cover can be made to fit a 2007 Honda Accord. However, the amount of helper parts to make this fit happen will cost more in the end than it would to have just bought the bumper outright.
Support the bumper with a jack or jackstandWith an assistant supporting the bumper remove the bolts/nuts retaining the bumper to the frameRemove the inner bumper bracket mounting bolts and the push-in fastners securing the air deflector to the bottom of the bumper fasciaDisconnect any wiring harnesses that would interfere with bumper removal and detach the bumper
I think you asked the same question twice (just in different forms). The answer to both is the same. 1. Remove front bumper cover (to expose headlight housing lower attachment bolt) 2. Remove light bulbs from housing 3. Remove bolts attaching housing and lift away from bumper Removal of the bumper cover will be easier if you have a manual. Chilton, Haynes both offer Solara manuals or download the factory service manual from Toyota's website. Cheers