Too broad of a question to answer without knowing the make of your truck, and the motor which is in it.
Lots of places install them. Shops that install radios in vehicles will usually sell and install remote starters. Call around.
Begin by removing the positive cable from your battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new Ford starter.
About 1 hour labor which would be around $75 at a dealer. That is not counting the price of the starter.
Just changed the starter in my daughter's '97 Aspire, two days ago. It'll help if you go buy the replacement starter prior to removing the old one. It cost me a little over $100 with a $30 core charge. First remove the battery. You'll then need a 8mm, 12mm, and 14mm socket. Remove the two 8mm nuts holding the starter to the bracket. Remove the two 12mm bolts holding the bracket to the frame. Once their out, you'll have to clear the studs on the starter and pull the bracket out. Remove the two 14mm bolts that hold the starter to the block(look at replacement starter for position). Once these two bolts are out, undo the electrical connection (two wires) and the starter will come right out. Reverse the process for installation. It took me about 45 minutes to complete.
I recently bought a starter for $100 at Auto Zone and paid a guy $60 to install the part. Dont know how much it would really cost if you took it to a shop.
How can i install a starter on a 2002 polaris 325 magaum
Do not install the shims. Your starter should work fine.
starter gear is to close to flywheel install starter shim
How do you install a starter in a 1977 Chevrolet Caprice Classic with a 5.7 liter motor?
install starter motor
To install a 1995 VW golf starter, remove the motor mount. Disconnect the wiring on the motor step and install the starter.Ê
Bolt the starter into the starter position. There will be three starter retaining bolts. Connect the cables to the front of the starter.
Stick the starter in the cutlass supreme.
how to replace starter for a 2002 buick rendezvous
To install a 2000 Yamaha Waverunner XL 1200 starter, first remove the 2 bolts. Then the wires connected to the starter. Remove the starter and replace with new.
Begin by removing the positive cable from your 1993 Chevy Corsica battery. Remove the cables on the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the positive cable from your 1995 Nissan Pathfinder battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.