In order to remove the alternator on a 1.6 liter four cylinder you will have to remove the a/c line going into the car located on the passenger side. Then you will have the room to remove the alternator from the car. There are 2 bolts holding the alternator in 1 on top and the other on the bottom. This is a fairly easy job should take about 15 - 25 minutes to complete.
In order to remove the alternator on a 1.6 liter four cylinder you will have to remove the a/c line going into the car located on the passenger side. Then you will have the room to remove the alternator from the car. There are 2 bolts holding the alternator in 1 on top and the other on the bottom. This is a fairly easy job should take about 15 - 25 minutes to complete.
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
Wilson the tensioner pulley and remove the alternator belt. Remove the wiring to the alternator. Remove the alternator retaining bolts. Remove the alternator and replace with a new alternator.
Remove the belt from your 1985 Nissan 300 alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. The alternator will come off.
Bad alternator
which pully do i remove tension to remove the alternator?
how do i remove a alternator
yes, you will have to remove all the plastics from the 94 and put them into the 92, as well as the wiring.
You will need to remove the alternator belt. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Remove the cables from the alternator. Remove the wiring harness. Remove the alternator belt. Remove the retaining bolts. Reverse the process to install your new alternator.
Begin by loosen the tensioner bolt. Slide the alternator to the left and remove the belt. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts.
Remove the alternator belt from your 2003 Ford Mustang alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.