(Also valid for 1998 model. //Scott C.) 09 April 2006 - Installed a new starter yesterday. Starter has 2 bolts holding it on the motor. Lift the hood and take off the air filter box blocking the view of the top bolt of the starter. After disconnecting the battery cables, take out the top bolt of the starter. From under the van, disconnect the cables to the starter. Take out the bottom bolt of the starter and it will back out from the motor. Don't let it fall on you! These new starters cost around $150.00 so, if you take it to a shop that rebuilds them, you can save a lot of money and most likely have a better starter than a "new" one. Most cars come with a "heavy duty" starter and parts stores usually don't give you that kind of a quality starter in return. //Master Sgt. Charles W. M.
Remove the positive cable from your 1995 Nissan Pathfinder battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
Remove the starter cables. Remove the retaining bolts. The starter will come off. Reverse the process to install the new starter.
Remove the cables from the starter. Remove the three retaining bolts from the starter. The starter will come out. Reverse the process to install the new starter.
Remove the battery cables from the starter. Remove the retaining bolts from the starter. The starter will come off. Reverse the process to install the new starter.
To install a 2000 Yamaha Waverunner XL 1200 starter, first remove the 2 bolts. Then the wires connected to the starter. Remove the starter and replace with new.
Remove the starter cables. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
Remove the wires from the starter. Remove the retaining bolts. The starter will easily come out. Reverse the process to install the new starter.
Begin by removing the positive cable from your 1993 Chevy Corsica battery. Remove the cables on the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the cables from the starter. Tape the end of the positive cable, so it will not spark. Remove the retaining bolts from the starter. Reverse the process to install the new starter.
Remove the positive cable from your 2004 Pontiac Vibe battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the positive cable from your 1999 Chevy battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.