0
standing in front of vehicle look towards your left hand, between battery and motar on the valve cover is the pcv valve. the hose connected with the pcv valve is the pcv line. to remove simply pool on the hose of the valve cover >gently its not that hard...
know comes the hard part, look for the connections of that pcv line on the back of the intake manifold. it will be tricky and please do it while the motor is cold that mother burns it gets really hot<<<<lol
well take your time because you will runnin to snapping hoses in to two the figuring how to get it off..patience is a vertue good luck....
mr. north philly
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you change the PCV valve on 2000 Blazer?
Find the PCV valve towards the rear of the engine, and remove the PCV valve. Remove the rubber vacuum line, and discard the old Valve. Connect the vacuum line to the new valve and put the valve in its place.?æ
How do you change PCV valve on 2004 F-150?
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
Where is the PCV valve on 2007 Honda CR-V?
Standing in front of the auto, the PCV valve is located on your left. The PCV screws into the intake manifold just above the alternator. 1. Remove the two cap screws (10 mm) to remove the intake manifold cover. 2. Remove the PCV hose using needle nose pliers. 3. Use a 17 mm deep well socket to remove the PCV valve from the intake manifold. 4. Install the new PCV valve, PCV hose and intake manifold cover.
Where is the location of the PCV valve on a 1998 Buick Lesabre 3.8 liter engine?
The PCV valve is hidden on top of the intake manifold down in a little enclosure. There are two small bolts holding the PCV cover. Often there is a fairly large vacuum line coming into the enclosure. Remove the cover and pull the PCV valve that sits down into a gasket. Simple
How do you change ford 500 PCV valve?
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
How do you remove the PCV valve on a 1997 Camaro 3800?
the PCV valve should be located on top of the engine block, on the passenger side. there will be 2- 10mm bolts holding it down and a plate will be labled (PCV) on it. simply remove bolts, the spring and the PCV valve should be sitting right there.
Change PCV valve on 95 Lincoln town car?
Remove the vacuum hose from your 1995 Lincoln Town Car PCV valve. Remove the retaining screws from the valve. Reverse the process to install the new PCV valve.
Where is the PCV valve located on a 1995 Chevy Lumina 3.4?
The PCV Valve on a 1995 Chevy Lumina 3.4L is located in the line that comes off the rear intake manifold between the throttle body & the intake. This line is on the back side of the throttle body and intake manifold where the two come together and make a "L" shape. The middle of the "L" shape has a approx. 1/2" rubber line that comes out and is held in place by a sqweeze tight mettle clamp. If you follow that line for aprox. 6" you will come to the PCV Valve. Mine was covered with another 1" hose over the top of it, so you will need to remove that carefully. The bottom of the PCV Valve is a plastic line. You do not need a L shape PCV valve, my 3.4L lumina needed a straight PCV Valve. it only took me 4 hours to find it :(
How do you replace the PCV valve on a 2004 Honda Accord?
The PCV Valve is located in the Vaccum line above the alternator.
How do you change the PCV valve on a 1989 Olds 3.8 ltr engine?
Remove the vacuum hose from your 1989 Oldsmobile 3.8 liter engine PCV valve. Remove the retaining bolts from the valve. Reverse the process to install the new PCV valve.
Where is the PCV valve located on a 1990 jeep grand wagoneer?
the 89 with the 360 has the pcv valve in line behind the carburator.
Where is the PCV valve on a 2002 Pontiac Bonneville?
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
