0
Buy a new filter, oil and new oil pan gasket. Never use an old gasket unless you have no choice (stuck in the middle of nowhere). Drain oil. Remove oil filter. Remove the approximately 10 bolts around the perimeter of the pan. Remove old gasket, clean the gasket surface on the engine and new pan with brake degreaser. Install the new gasket onto the pan. Insert 1 or 2 bolts through the pan holes and then put the new pan, with its gasket and bolts, onto the bottom of the engine, and hand-tighten two bolts to hold the pan in place. Then add the rest of the bolts, tighten evenly to the specified torque, install a new filter (Purolator's Pure One), and add the specified oil. Put the oil cap on and run the engine to check for leaks.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How long does it take to replace an oil pan for a prelude?
5 hours
How do you replace a oil pan on a 1992 Honda Prelude?
Raise and support the front of the car. Remove the crossmember and downpipe. There is a cover for the transmission - remove that too. Remove all the 10mm bolts around the oil pan. Pull the oil pan off. Replace. Don't forget to drain the oil first!
Reason's a H22A4 from a 1998 Honda Prelude would lose oil?
pcv valve replace every 30000 miles.. bad oil pan gasket, or valve cover gasket
How do you change oil pump 1999 dodge?
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
Do you really need to replace the oil pan gasket?
yes if its leaking or if u replace the oil pan
I was driving my 1991 Honda prelude and hit the oil pan on a speed bump and now its starting to knock why is it knocking?
fan is hitting where the dent in the oil pan is
When do you need to replace your oil pan?
You never need to replace an oil pan unless it has been damaged and is leaking.
How do you change the oil pump on a 94 Honda Prelude?
The oil pump on a 94 Honda Prelude is changed by draining the oil, unbolting the oil pan, and removing it from the vehicle. The oil pump can then be unbolted from the engine and a new one installed.
How hard would it be to replace oil pan on 1995 Sonoma?
How hard would it be to replace oil pan on 1996 Sonoma?
How do you replace an oil pan on a Hyundai?
Oil pans on Hyundai vehicles are on by several mounting bolts and nuts. Once remove the gasket for the oil pan will need replacement. Replace the gasket and reinstall the oil pan.
How do you change engine oil and filter for 2008 Mercury Milan?
Place a drip pan below the oil pan and oil filter. Remove the oil pan plug. Drain the oil into the oil pan. Replace the plug to the oil pan. Turn the oil filter to the left, to remove. Fill the oil filter with oil and replace it to its original position. Fill the motor with oil.
Do you have to drop oil pan to replace timing cover?
do youi have to drop oil pan to replace timing cover for 89 ford bronco
