I just finished doing that on my van and its also a 95. I removed the fans, then the A/C pump and the Power Steering pump, afterwards I removed the intake manifold. after that remove both exhaust manifolds and then you should have a clear room to take the heads off
You'll need to remove everything in the way, pull the rocker cover, remove the head then take the head to a machine shop to have it milled. Almost every time the head gasket blows, it's because the head is warped from engine overheating. Do NOT try to put it back together without having the head tested/milled by a qualified machine shop. You can't determine if it's flat just by looking at it. Only a machine shop can do that for you.
I just finished doing that on my van and its also a 95. I removed the fans, then the A/C pump and the Power Steering pump, afterwards I removed the intake manifold. after that remove both exhaust manifolds and then you should have a clear room to take the heads off
You'll need to remove everything in the way, pull the rocker cover, remove the head then take the head to a machine shop to have it milled. Almost every time the head gasket blows, it's because the head is warped from engine overheating. Do NOT try to put it back together without having the head tested/milled by a qualified machine shop. You can't determine if it's flat just by looking at it. Only a machine shop can do that for you.
Replace freeze plug in a 1998 ford windstar ?
How much is it to replace thehead gasket on a honda accord 1998?
Too many steps to list here. Purchase a repair manual for that vehicle from your local auto parts store.
The only repair is to replace the head gasket.
YES! Replace the head gasket or destroy the engine if you continue to drive it.
head gasket? Between $800 and 1,800.
audi a 6 1998
How_much_should_it_cost_to_replace_a_1996_oil_pan_gasket
ask an automobile expert and please answer the qu were the evaporator is P.S. not my qu
Just had it done on my 1998 Venture - It cost about 900.00
Not likely - the 1999 Windstar was a rather significant updating of design compared to 1995-1998 models.
A 1998 Ford Windstar would use refrigerant 134a