If your roll bar is in the up position after you hit a bump or something like that, you only need to press and hold the switch(for the up and down position of the roll bar)pressed in for the up position for about 5 to 10 seconds.
Doing this you reset the roll bar.
After that the roll bar will work as normal
Roger(Norway)
A bar diagram can help u solve and plan a problem cause some people may not know how to figure out the multipliers and it is a great way to get it
anti-roll bar is used to reduce body roll
it has a roll bar that is bolted to the body its called a sport bar not much protection compared to a roll bar welded to the frame
hello, I'm trying to remove the automatic transmission and I have a problem: I can not remove the two roll bars ranging from the support bar from the harness to change the front axle. I removed the two transmission shafts I removed the bolts that hold the support bar of the change, I have raised before the vehicle so that the wheels do not touch the ground, and I completely loosened the bolts that record stabilizer bars, I tried to beat the bar with a hammer to support gearbox remove it from the two roll bars but does not move. thanks
form_title=Install a Roll Bar form_header=Roll bars can be a valuable source of protection in the case of an accident. Do you use this car for going off road?= () Yes () No Will you need just the roll bar or a full roll cage?= () Roll Bar () Roll Cage Is your car a convertible?= () Yes () No
An anti-roll bar is a bar which is stressed to reduce the effect of a car leaning to one side during cornering.
roll bar
Anti-Roll Bar or Sway Bar
BAR stands for Browning Automatic Rifle
the reason the roll bar won't go down is ,either roll bar was activated by an impact or it was activated if vehicle was jacked up with keys in the ignition. You will have to do a manual reset on the roll bar to reset. this is done with the tool provided in your tool kit.
Sway bar has other names as anti-roll bar or stabilizer bar and is present in automobile suspension. The purpose of a sway bar is to keep the body roll of the vehicle at low level during a sharp turn.
Not possible to answer this since it's not possible to find out what the problem is - not everyone is familiar with "math paper 2". However if you wish to type the maths problem into the question bar, I'm sure someone will help you with it.