Depending on the year, there may be one fuse for all three brake lights, or two fuses, one for the highmount brake light and one fuse for the two lower brake lights/tail lights. So, if all three brake lights are out, it could be just one fuse or perhaps the brake light switch which is on the brake pedal metal arm assembly.
Check the brake light bulbs, Check the brake light fuse, Check the brake light switch, In that order.
the brake light driver side not working
The brake lights in your 1983 Nissan pickup truck are controlled by the brake light relay switch. When the brake light relay switch malfunctions the brake lights will stop working.
probably the brake light switch on the pedal if none are working at all
Bulbs blown, or corroded sockets.
There should be a fuse for the brake lights. If the fuse is good always check the ground wire.
turn signal switch needs replaced!
If you brake lights are not working on your trailblazer it could be due to a number of reasons. Your fuse could be blown, or your light may no longer work.
if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal
How about a malfunctioning brake light switch
Could be the brake light switch or fuse.
Check the bulbs, the fuse and the brake light switch.
Check bulbs, fuse, brake light sensors.
Please re-phrase your question; it appears you are saying the brake lights come on when you push the brake pedal and the lights are working (normal operation). If the lights are staying on after you release the pedal, then the problem is with th brake light switch (sticking). Thanks Malcolm
Brake light switch on the brake pedal is defective
The brake lights may not work on a 1993 Honda Prelude if the brake light switch is no longer working. The brake light switch is in the steering column just above where the brake pedal is bolted to it. There is also a chance that a brake light fuse is blown.
put your foot on the brake pedal and press down while some one looks at the brake light to see if it lights up
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
Check the brake light switch.
Assuming the signal lights still work, no. But a bad brake light switch or a blown brake light fuse could.
If you dash lights are not working check that your parking/brake lights are working also check fuses for cig lighter and interior lights that may help get the dash light working again.
Check your brake light switch at hte brake pedal.
They are two separate circuits, each has their own fuse. The brake lights not working could be caused by a few things such as a blown fuse, blown bulbs, bad brake light switch, misadjusted brake light switch and depending on what vehicle you have, a bad signal light switch.
Have you checked your bulbs ? The tail light / brake light bulb has 2 wires inside it In my case I have had to change each bulb because the brake light portion did not work but the tail light portion of the bulb did ( I'm assuming that your front park lights are working )
Ask questions, submit answers, leave comments
Earn points for using the site
Customize your profile
Already have an account? Log in