answersLogoWhite

0


Best Answer

Sounds like bulbs have burned out try replacing them

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: If you have 2001 and you have no light in dashboard where you change shifts you get lights high beams but no light in tail only when you press break you change all fuses and still no light what could?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you turn the hi beams on a 94 Baretta?

Turn the lights on by rotating the large knob on the left top of the dashboard. To engage high beams, simply pull back on the turn signal lever. Do disengage do the same.


Why wont the Low beams work on your 2003 impala the high beams work and also the parking lights?

you blew out a fuse under the hood just change it and it should work


Why do you have High Beams Lights But No Low Beams Lights on my 1993 Chevy Van?

Bad bulbs Bad dimmer switch


What does the outline of a car with a red headlight symbol mean on the dashboard of a 1998 BMW 318I?

You might have a headlight out. Check the high beams to make sure that they are working. (Those are the REALLY bright lights.)


How do you run highbeams and fog lights on a 2007 mustang gt?

the fog lights work with the low beams , they wont come on with the high beams


Why wont the daytime running and low beams lights work when I have high beams and have changed both lights and the switch?

Have you checked the drl relay?


What type of lights does a golf mark 4 have?

The low beams and high beams are both H7 bulbs. The fog lights are H3's.


What could be the cause of your high beam lights working and the low beams not on your Chevy Malibu?

These lights have 2 different "lights" in each of them. This occurs frequently. Change out the bulb and everything will be working fine once again.


Which lights should you use when you are drivingin a fog?

Low beams and fog lights if equipped. High beams only light-up the fog more.


Why would my headlights quit working but the parking lights brake lights and tail lights still work and high beams do when switch is pulled back on a 94 Grand Am?

Low beams are burned out.


How do you keep your headlights and fog lights on at the same time on a 2000 Buick Regal LSE?

There is a switch especially for the foglights under the dash towards the driver's side door left of the steering wheel. The foglights will come on only if the low beams or the park lights are on. When you change from low beams to high beams the foglights will go off. Also when you turn the car off the fog lights go off too.


When turning on head lights in my 1993 ford explorer they do not work when you hold the high beam switch then the head lights work?

your bulbs are burnt out. when you switch on the high beams its only the high beams. but when you flash your brights it lights up both high and low beams.