No, unfortunately not.
Go down lower gears and press brake gently.
When you are shifting gears, your RPMs will go down because your clutch is being pressed. If your RPMs don't go back up when you release your clutch, you should see a mechanic.
The brake fluid level will gradually go down as the brake pads , brake shoes wear
Possibly a problem with the brake light switch It is linked to the gear selector If the switch is faulty you cannot select gears Make sure the brake lights are working
Either your gears are not locking at the start or you are in park or neutral or emergency brake on.
your need to have your computer calibrated for the gears changed did it to mine i have super-chip programmer and set for 456 gears and went out hope this helps but u can just go to dealer to get it set
You hit the gas clutch on the lower left side. Then you switch gears to 2, after that you would kick-start it up and then you fling yourself down a hill and go flying. YOUR WELCOME.
It can go all the way down to empty, but should never be allowed to get below "add".
no all gears can not go in same diretion
CHECK THE FUSE FOR THE BRAKE INTERLOCK TO SEE IF ITS BLOWN.IF THATS NOT THE PROBLEM THEN ITS MOST LIKELY GONNA BE THE BRAKE SWITCH WHICH IS LOCATED UNDER THE BRAKE PEDAL.
if you have hands you can do anything just hit the egg with your nuckle and there you go!
Gears is what transmission is for. No gears. No transmission!