Have the system checked for trouble codes.
The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.
The onboard computer senses the position of the crankshaft by monitoring the output from the crankshaft position sensor. With that information, and the input from other sensors, the computer can determine appropriate injector duration, ignition timing, EGR valve operation and transmission shift points.
The crankshaft position sensor on a 3.5L Chrysler Pacifica is located next to the motor, toward the rear. It can be found next to the transmission.
The sensor in the distributor is the crankshaft position sensor.
The crankshaft position sensor mounts to the top rear of the transmission bell housing.
It does not have one. Crankshaft position sensors are used in distributorless ignition systems to tell the ignition control module where the crankshaft is in its rotation. The 1982 thru 1986 2.8L engines had distributors so they had no need of a crankshaft position sensor.
what is the crankshaft position located on a 2014 Chrysler 200 3.6 live
On crankshaft position sensor, one camshaft position sensor.
It is bolted to the bell housing on the passenger side.
It is on the top rear of the bell housing.
1983 doesnt have a crankshaft position sensor. you have an ignition module located on the side of the distributor.
In the front under the starter you have to get to it from under the car