No only if its got a 't' in it. It will be 70 BHP diesel, same as 1.6 petrol (But all Diesel engines are a "turbo" - it's how the diesel engine works." All diesel engines are not turbo charged !!!
The easiest way to identify if the engine is turbo charged is to look at the exhaust manifold and see if you can see a turbo, a normally aspirated engine will have the exhaust pipe straight on to the manifold a turbo charged engine will have what look like bulges in the manifold area with a small rod and vacuum pipe (this controls the waste gate).
On the 306 the easiest way to identify either way is to open the bonnet and look at the engine, if there is a unit on top of the engine that looks like the radiator this is the 'intercooler' and the engine is turbo charged if this is not present and there is a black air box then this is normally aspirated and does not have a turbo !!
probably 10W40
You sure the start motor hasn't failed? I have the same problem on my 306.
i dont know how to disable completely but if you have got the code wrong a few times and wont let you try again then you have to disconnect the battery in order to try again.
The switch or relay must be stuck.
yes it does
== ==
Salmonella-Shigella (SS) agar. XLD agar. Hekton enteric agar.
X Lossless Decoder (XLD) will open FLAC and Cue files. (See links below)
Depends on exact model and condition, but typically $125-$300.
I would think that if you have lost the pulley, you have also screwed the belt up. I would imagine that the pump you get from the breakers would have the correct pulley associated with that particular pump so it would not be an issue. The belt would be spec'd for the pulley size I guess. If you still got your pump, I would opt for the smaller pulley so that it does not spin too fast. Obviously the larger pulley would do more revs than the smaller one. You should be able to contact peugeot about the pump and they would spec the pulley for you. Maybe if you measure the spindle diameter it would give you one specific pulley to purchase. Different pump may have different spindle diameter.
Cruise control, using your thumb turn it to tighten, I have to use thumb and forefinger to loosen, hope that helps. It's just a simple friction lock, so hitting your brakes like on a car will not turn it off. it is not a cruise control it is used to warm up the engine
these media contain substances that accelerate the growth of required pathogens only and prevent or slow down the growth of other microorganisms. example: XLD agar: it is used for the growth of salmonellae and shiggellae. the bile salts present in this media prevent the growth of many fecal commensals.