0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the power of a 1200 watt hair dryer in kilowatts?
A 1200 watt resistive load hair dryer is equivalent to 1.2 kw (kilowatts).
Two examples of resistive heating?
An incandescent light bulb. An electric heater. A simple resistor. Basically most things that heat up when a current is passed through them do so due to the resistive nature of the load.
When a coffeemaker has a resistance of 10 ohms and draws a current of 11A what power does it use?
The power used, assuming Unity Power Factor (resistive load), is the product of resistance and the square of the current -- or 1210 Watts.
What is equal to 1000 watts and starts with K?
1 megawatt is equivalent to 1000 kilowatts. the measure of Watt is power fed to purely resistive loads. KVA is a measure of power, regardless of whether the load is resistive or reactive. For direct conversion from KVA to KW or vice versa, a power factor is needed.
What is called the force between the tire and the road?
resistive force (friction)
Is computer is Resistive load?
It is resistive much load
Do air conditioners use resistive load or inductive load?
resistive loadAnswerIf the current is driving a motor, then the load is resistive-inductive.
In a circuit with resistive and inductive load what happens to the power factor as the resistive load increases?
The PF will increase
Is a geyser a inductive load?
No, a geyser is a resistive load.
Why bulb is resistive load?
the filament is made of tunguston which is having high resistance value,Hence it's resistive load
What are the specifications of resistance?
specification of inductive load,capactive load,resistive load in laboratory
What is the least destructive load to switch?
No load is the least destructive load to a switch.
How many watts by 10amp load at 12volts?
For a resistive load it is 120 Watts.
Fan is inductive load or resistive load?
Inductive since it has a motor with windings.
When using a resistive load bank to test a generator do you load it to the kW or the kVA?
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.
What is an example of resistive load?
Some examples of resistive loads are: heaters, incandescent lights, fans etc.
Vector diagram for a loaded transformer where the load is resistive?
the ampere i=0is theonlyedge where the e0b and e0c can come together and share the load and that way the two vector diagrams will connected and the load will be less resistive and more on the ek0 and c73 resistive load. the 38f93 relay will be the one to break the load 2u3 and e0b and e0c into diffrent components that will be drawn in the diagram.
