Power Steering
Chevy Corsica
Ford Windstar SE
Ford Windstar LX

Is it complicated to change out the power steering hose on a 1992 Corsica 3.1L V6?


Top Answer
User Avatar
Wiki User
2015-07-16 18:11:38
2015-07-16 18:11:38

No, it's not complicated...just aggravating. On the front of the motor, there are two braces that run towards the radiator. Take them off so you can pull the motor forwards...that will give you more room to work. Undo the line off the rack and may need a flare nut wrench to get it off. At the pump, you'll need a flare nut wrench again to remove the pressure line. The return line is held onto an elbow by a clamp. If that line needs to be changed, it's best to cut the old line off the elbow because if you yank on it and break the elbow, you'll be buying a new pump.


Related Questions

User Avatar

how to change preasure hoses for power steering how to change preasure hoses for power steering

User Avatar

If you have an electric power steering system, that means you HAVE NO FLUID. Therefore no fluid to change in the 1st place.

User Avatar

how you can change the power steering pump

User Avatar

Power steering pumps are more complicated than rack and pinion steering. They are driven by belts and pulleys, using power generated by the engine crankshaft.

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.