Definetly not the same animal, some vehicles have one or the other, some have both. Your local parts store can look up and usually show you the different sensors your vehicle may require.
CMP : camshaft position sensorCKP : crankshaft postion sensor.CMP : camshaft position sensorCKP : crankshaft postion sensor.
CMP-camshaft position sensorCKP-crankshaft position sensorCMP-camshaft position sensorCKP-crankshaft position sensor
where is crankshaft position sensor and camshaft position sensor on a 2004 Jetta 2.0 gl
where are the camshaft position
It's behind one of the camshaft pulleys. Why would a CRANKSHAFT position sensor be behind a CAMSHAFT pulley ??
The crankshaft position sensor must be behind the timing belt cover next to the crankshaft and behind the crankshaft pulley. The camshaft position sensor is again under the timing belt cover next to the camshaft and behind and the camshaft pulley. Is it the same place in 2000 Camry 4Cyl? Do you have pictures of the location? Hard or easy to replace, and what tools do I need? Thanks alot
The sensor is located directly above the crankshaft pulley. The camshaft sensor also connects with the crankshaft position sensor.
Yes, it is inside the distributor.
Answerthe camshaft sensor is the distributor but the crankshaft position sensor is located right next to the crankshaft its held on by one bolt
I changed only the camshaft position sensor on my 2000 Kia Sportage. So I don't think so.
The 1998 Saturn SL2 will show a code 340 and 341 for a camshaft position sensor because this part is also considered the crankshaft position sensor on the Saturn. The location of the crankshaft position sensor is behind the alternator on a 1998 Saturn SL2. Both crankshaft and camshaft are the same thing This vehicle is not equipped with a camshaft position sensor. Saturn is the only manufacture that uses a auto pulse generated inside the ignition control module in conjunction with the pulse received from the crankshaft position sensor to determine ignition and injection timing. If you have a code for camshaft position sensor the issue is with the pulse generator in the ignition control module.
On crankshaft position sensor, one camshaft position sensor.