right before the air cleaner box on a 2003 siverado5.3 motor is a connector with 5 wires yellow,black, tan, blk & white, and a red one . the blk. & white is your grn. and the tan is your iat wire
The intake temperature sensor is located on the side of the air filter case on a 2003 Chevy Silverado 4.3 1500. It is on the top of the engine.
That sensor was not used on that year. IT DON'T HAVE 1
The intake air temperature sensor on a 2004 Silverado is located in the 5 wire MAF sensor coming from the air fiter box. It can be relocated by cutting and splicing the tan and black wires going to the MAF sensor.
the intake air temp sensor for an 07 Silverado is built into the MAF sensor. The MAF is located on the air intake hose.
It is screewed into the intake manifold right beside the thermostat housing.
The IAT (intake air temperature) sensor should be in the air intake snorkel between the MAF (mass air flow) sensor and the throttle body.
Should be mounted on the intake under the engine cover. NEW ANSWER: The AIT sensor is part of the mass air flow sensor on that year. Must replace MAF sensor to repair the AIT sensor. NEUTZ
If your taliking about the ambient temp sensor it is located behind the grill drivers middle.green plug. near the tranny cooler. the iat sensor is mounted on the intake.
The intake air temperature sensor can be found on the top of the air intake manifold. The temperature sensor should be labeled as such.
There are 2 knock sensor under the intake manifold, You will need to remove the intake to get to them.
The IAT (Intake Air Temperature) Sensor is a Two (2) Wire sensor located close to the intake.
The air intake temperature sensor can be found on the top of your manifold intake. The sensor will be right in the middle of the intake manifold.