socket and force bar on bolt brace against frame and use starter to loosen
you unscrew it
15mm
It is on the front of the motor, it will be the bottom most pully.
the harmonic balancer is the crankshaft pulley approx6 or 7 inch diameter lower pully center of engine the serp belt is driven by power pulley also have a retaining bolt in center
The crankshaft sensor on the 1998 NISSAN ALTIMA is located next to the radiator side of the harmonic balancer
It's on the inside of the Harmonic Balancer Pully. It shoud be blue in color
You can replace the timing belt on a 1998 Plymouth Breeze 2.0 engine using a Harmonic Balancer Puller 5.
the crankshaft position sensor is located right behind the harmonic balancer mounted on the timing cover
there should be a hole on the tensioner bar that fits a 3/8 ratchet. using the ratchet rotate the bar counter-clockwise(on a 2000 mustang) to loosen the belt.
There should be advance marks on the harmonic balancer, and timing marks on both timing chain gears.
between 150-180. anywhere in that area is fine
Yes there is. It is bolted in the passenger side of the timing cover behind the harmonic balancer / bottom pulley on the front of the engine.