0
If you have Mazda 323 anywhere from 1994 - 1998 and the radiator starts to boil after running it for a couple of minutes, check if you temp goes higher than normal. If this is the case, this is most likely to do with your thermostat which is probably jammed shut which doesn't let the cooled water run through into your engine. When this happens the outlet of water from your engine is boiling the water which is jammed. Theres two water pipes connecting the radiator to the engine the lower pipe on the left is the outlet from your engine and the higher right side is the outlet into your engine. If you remove the higher right hand side pipe which is normally held on by a jubilee clip makesure your engine is cool. Undo the 3 bolts to the inlet which is connecting the radiator pipe to your engine and you will see your thermostat pop it off with a knife or a screwdriver. You should be able to pick up a thermostat for around £6. Replace with a new one, replace your inlet and your radiator pipe. Refill your radiator and your problem should be solved. Good Luck.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where can you find the radiator drain plugs on a Mazda 323 Interplay?
the radiator drain plug is located on the bottom of the radiator,on the radiator
Where is voltage regulator for a 1989 Mazda 323?
Next to the radiator on the drivers side, in front of the battery.
Where is the thermostat in a 1998 Mazda 323?
Look at the engine end of the upper radiator hose in a removable housing
Where is the thermostat located on a 1981 Mazda 323?
It is at the lower end of the top radiator hose within the water outlet on the motor.
Why does the radiator fan start the same time the ignition is turned on for a 1989 Mazda 323 at cold start?
Turn the AC or the Defroster off.
Where is the radiator drain valve on the 2003 Mazda 323?
on a Mazda 323f the radiator drain plug is at the front left bottom corner of the radiator as you look towards the bonnet, it needs to be opened with a Phillips head screwdriver, the plug itself looks more like a screwhead and as such may not be recognisable at first
How do you remove brake drum on 1991 Mazda 323?
how do remove the brake drum on a 1991 mazda 323
Will the back suspension from a BG Mazda 323 fit in a BF Mazda 323?
No sorry they are completely different.
What is the timing setting's for a Mazda 323 E5?
Mazda 323 familia valve timing set up
What is the stud pattern on a 1984 Mazda 323 fwd hatchback?
114x4 thats what i was told on my mazda 323 '84
What is the speaker size on a 1992 Mazda 323?
The speaker size for a 1992 Mazda 323 would be 6-1/2.
Where can you get a wiring diagram for a 1989-1993 Mazda 323 hatch back 1300cc?
The Mazda 323 of that time from had a 1600cc engine but that isn't going to effect the issue of where to get a wiring diagram. Haynes makes a manual for the 1990-1994 Mazda 323. If you have a 1986-1989 Mazda 323, you will need to get a FSM (Factory Service Manual).
