You can't! I know it sucks but you have to replace the entire regulator assembly. Actually, it depends on which plastic clips you're trying to replace. True that the plastic slides are only available as part of the regulator, but the plastic glass channels are available separately from various sources, including Advance Auto's "Help!" section. The adhesive to attach is another matter, however. GM sells individual use vials at incredible prices that typically aren't in stock and are available only in box quantities, if special ordered. Check glass/windshield replacement stores, or NAPA sells a eurothane adhesive that has so far worked for me. Not exactly inexpensive, but doable. Be sure to buy the primer that goes with it, strength only a fraction without it!
It is easy to replace the window regulator or window clips on the rear window of a 2000 Grand Am. The clips simply snap right onto the rails inside that door that connect to the window.
you will have to replace the window regulator.
You will have to replace the regulator assembly.
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
Which regulator and what year? You have a window regulator, voltage regulator, fuel pressure regulator to name a few.
The plastic clips on you window regulator have broken. You need to replace the whole thing if those clips have broken. Take the door pannel off and see if there are plastic peices in the bottom of the door.
In order to replace the electric window motors on a Pontiac Grand Prix you will need to unscrew the Torx screws on the door, life it back to remove the plastic pieces. Remove all connectors, and the plastic covers.
Trade it in for a Holden
Try this link, http://www.a1electric.com/grandam.htm. It shows how to replace the entire window regulator assembly (which includes the motor). Probably the cleanest description I have found.
change the window regulator
This is not an easy job. Get amanual on your car and it will give you the correct procedure and the job will be done correctly.
The regulator is part of the engine computer. You will have to replace the computer.The regulator is part of the engine computer. You will have to replace the computer.