Be the first to answer!
the negative wiring for the speakers is the same colour as the positive but with a black line going down it
If an immobilizer light on a 2005 Peugeot Boxer will not go out it indicates a problem with the wiring. The immobilizer can be by-passed until the wiring can be checked.
heating does not work
nightmare, you have to use a peugeot kit that gives an extra control unit, that then has to be programmed to the vehicles BSI.
Peugeot 106 workshop manual.
INFINITE times ,permanent, perfect CHUTIYA
Green and red wire on lambdA sensor
Could be switch on gearbox, wiring or bulb.
Positive is a term that is associated with DC current and has nothing to do with house wiring unless it is run off of an inverter.
If you clock does not work in your Peugeot 206 when the stereo is plugged in, check the clock fuse. You should also ensure you do not have a wiring problem.
yes you need to buy a haynes manual
Ask a doctor
AV on wiring diagrams for construction refers to "audio-visual", i.e., sound and video cabling and accessories.
No there isn't but most do have the wiring. You can buy one from a scrap yard and fit it urself or just take it to the nearest peugeot garage.
You can look here for the wiring. The pomp is item 1210. http://peugeot.mainspot.net/wiring106/tu1mz.shtml Greetings Schaap.
Yes, you always connect positive first.
peugeot.mainspot.net i couldn't find the diagram..1.4xsi's are tu3 engines :/
On a car red is usually positive. But positive can also be black in some applications such as home wiring.
White is neutral in home wiring. Red is sometimes used in 3-way switches and dimmer applications, so it is likely red is hot in your application if it pertains to home wiring. The term positive would just apply to DC wiring since AC goes positive and negative. For example your car battery has Red as Positive and Black as Negative.
There is not a colour code system as such on Peugeot's Near to the end of the wire is a number this is the code.
Damage to the alternatoron both can occur and permanent damage to the batterries also can occur. Always be sure of +positive to +positive and -negative to -negative if unsure do not attempt to jump vehical it can be a costly mistake It can "fry" the alternator, the computers, wiring, fuses, and the battery.
1st off, i would ck elec. connections @ battery. If no probs then i would ck the fuseable links (i have a '88 z2.4 and they are located in the wiring harness very near the positive battery conn.)
When making changes to anything electrical it is good to have a diagram to ensure everything is done correctly. A person can find a diagram for a Peugeot 309 Diesel in the owners manual or maintenance manual.