Rotate #1 cylinder to top dead center. set the cam gears to factory specs. Install belt. Set the belt tentioner to specs. Reinstall everything.
The D16 ignition timing needs to be set to the middle of the three marks. Typically, these marks are red and are located before the TDC mark on the crank.
The timing is set by aligning the timing marks on the camshaft pulleys with the crankshaft pulley. The easiest way is to use the markings on the timing belt. Then turn the engine by hand through 2 revolutions to make sure the timing marks line up.
all timing marks are on the belts and cams. just line them all up and it will be timed
how to reset ttiming chain on a 1996 mercedes benz c280
If memory serves me correctly, the timing marks will be behind the timing belt cover. There will be marks on the gears and also marks on the block. Line the top gear with the top mark and the bottom gear with the bottom mark. Please note that you will need to undo the battery for a few minutes and then reconnect. This allows the computer to reset itself. Hope this helps
how do you reset remote central locking peugeot partner
http://www.truckforum.org/forums/gmc-truck-forum/10885-97-5-7l-vortec-timing-reset-question.html
Timing belts are replaced, not reset.
The immobilizer on a Peugeot 207 can be reset by removing it and reinstalling. Another option is to install a new reader.
You cant "reset" the timing on these. It has computer controlled ignition timing. If there is a timing problem check the crank sensor.
need to reset timing on intrepid 2.7 2002
You do not reset a timing belt you replace it.