Remove all the gas in the tank. Put the vehicle on a lift. Support the tank and remove two straps. Remove the filler hose from the tank. Slowly drop the tank until you can access the top. Remove the plastic lock on the wiring harness. Remove the wiring harness. Remove the pump outlet line and the gas return line. Mark them so you won't get confused. Drop the tank to the floor. Remove the lock ring lock. Using a spanner or 6 inch channel-lock pliers, rotate the lock ring counter-clockwise. Impart a downward pressure as the fuel pump is spring loaded. Pull up on the pump and remove. Replace with new gaskets and lock ring lock.
replace a fuel filter on a 1999 Oldsmobile Silhouette
In the fuel tank. You have to drop the tank to access it.
You must remove the fuel tank in order to access the fuel pump.
In the fuel tank. You have to drop the tank to access it.
25 gallons
The 1998 Oldsmobile fuel lines are held in place with swivel nuts on each end of the fuel line. Turn the swivel nuts to the left to remove the old rotted fuel lines. Reverse the process to install the new fuel lines.
Where is the fuel filter located in a 1999 oldsmobile aurora
GM vehicles are not equipped with a fuel pump inertia switch.
On just about all GM vehicles, you need to pull the fuel tank to get to the fuel pump.
No. They are two entirely different systems.
that pump is in the fuel tank
The fuel pressure of a 1999 Oldsmobile 3.8 liter V6 is 35 psi. A fuel pressure gauge is needed to measure the fuel pressure.