A bad starter might make a noise. The starter could also go bad with no noise or warning. However if the starter is making noise then there is a problem that could cause failure at any time
A vehicle's starter will being making a loud screeching noise if it does not align properly with the flywheel. It slams against the flywheel and grinds against the surface.
the starter is bad.
I have a `00 blazer and recently my car started making a loud winding noise also. Come to find out I had to have a whole new transmission due to that noise! The repair shop said that the noise is the first sign of the transmission going out!
If the Chrysler is only making a clicking noise and will not start, check the starter. Also check the alternator, and the battery. The starter solenoid is more than likely the reason the car is clicking and not starting.
Could be you have a bad belt or belt is loose.. Also it might be possible that the bushings are worn out of the alternator
The starter should only be making noise if you attempt to start the car and the starter is going bad. It is possible that the remote starter is bypassing the mechanical starter. Starters are very easy to replace. Be sure to disconnect the car battery before doing so.
well it could be 1 of 2 things that i can think of... either the starter gear might be broke or the battery might not have enough juice to turn the motor over Starter bendix defective.
Single phase motor winding is often checked just by listening to the noise that the motor is making. An experienced person can tell if the motor is working at single phase or double phase.
Shielded transformer
This usually happens when the starter drive goes bad or if the flywheel has been damaged by the starter or previous starter failure. When you pull the starter to have a look, turn the flywheel and check all the teeth on it before replacing the starter.
1st thought is you need shims if the flywheel is hitting the starter. What is the year and model of the vehicle?