0 degrees with timing connector unplugged which can be located under the glove box taped to main harness or under hood at firewall behind plastic cover at passenger side
Assuming your question is 'how to adjust the timing'...
on most older cars with a distributor it the timing can be adjusted by turning the distributor itself. Even just turning the distributor a little at a time with the engine idling you can get it good enough by ear. Then give it a test drive. It the car sounds fine but is sluggish accelerating advance the timing (by twisting distributor) in the direction that speed the idle.
hopefully that helps :)
what is the ignition timing for a 1988 Chevy 454 engine
In a 1988 Chevy pickup the ECM is located behind the glovebox.
How do you set timing on 1988-1995 Chevy Tahoe moters 5.7l?
NO. it does not.
The 1988 Chevy Celebrity uses distributorless ignition. There is no provision to alter timing, the engine control module takes care of that.
you need: fuel compression and spark
I have a 1988 chevy s10 pickup 2.8. I went to the service department at my local chevy dealership and they printed out 3 diagrams for me for free.
Yes but modification will be needed
The 1988 Chevy K 2500 pickup truck has a listed gross vehicle weight of 4360 pounds. The gross vehicle weight does not include any fluids.
worth keeping it
The 1988 Chevy C/K Series pickup truck has a fuel capacity of 25 gallons. The C/K Series was sold in the United States from 1960 to 1999.
In a manual for that vehicle.
YES, They are the same engines. That would be a direct bolt in.
how do you set timing on 88 s10 2.5? ?
It's 5 degrees BTDC.
It should be 0 at TDC
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.
YES, All the cabs are the same from 1988 to 1999
disconnect the battery for a few minutes
its in the tank so the tank must come out
From 1988 to early month of 1999 will work.
Yes it is the same fender.