answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2008-12-22 16:19:51

BLACK WIRES=HEATER CIRCUIT

WHITE WIRE=SENSOR GROUND

BLUE WIRE=SENSOR PLUS

VOLVOKAHUNA.COM

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still Have Questions?

Related Questions

What color wire does an oxygen sensor plug into on a 1991 Geo Metro?

They are blue, black and white. They can be found extending from the catalytic converter (the upstream O2 sensor) and possibly from a second source (the downstream sensor).


Where is the fuel filter located on a 1992 Geo Metro?

1992 Geo Metro fuel filter is on the drivers side, under the rear seat (outside, under the car) just in front of the rear wheel. It is fairly large, about the size of your fist, made of metal, may be black in color.


Where is the Wells Camshaft Position Sensor on a Chevy Metro 2000?

I have a 1998 Metro with the 1.3l and the Camshaft Position Sensor is located on the bottom of the oil pan.


Does the Samsung admire from metro pcs have a front face camera?

NO it does not have a front camera :( the thing on the front is a sensor that detects your head that way it can turn off the screen when you are talking on it "it basically is just a battery saver'' but all smartphones have them.


Where is the oxygen sensor on a 1991 Geo Metro 3 cylinder?

in the exhaust pipe right under the manifold it is easy to get to right in front under the hood


Where is vacuum sensor located on a 1991 Chevy Metro 454 engine?

that must be some metro to have a big block


Where is oxygen sensor on Geo Metro?

under he motor mount


Where is the Location of EGR valve in a 1998 Geo Metro?

Looking at the front of the engine, it is on the right hand side of the engine, just below the o2 sensor. It will have two tubes going into it.


What is trace Cyrus from metro station's favorite color?

it is black grey and red that is my fav coloers 2 well mine are black,grey,and red then pink but i only like pink wit black lol


Installation of a crankshaft position sensor on your Chevy Metro?

it is located on the head


Can a shorted out oxygen sensor destroy the computer on a 1997 Geo Metro?

It is possible as the signal from the oxygen sensor is sent to the computer


Where is the crankshaft sensor on a 95 Geo Metro motor?

Most '95 metros do not have one, if it does It's below the crank gear on the front of the engine, oil pan area, it is a two conductor connector


Can a non crank sensor Geo Metro 1.0L work in a Geo Metro that had a crank sensor or will I have to exchange the oil pan and front cover behind the crank pully of the non crank sensor engine?

it can work! but you need exchange de oil pan, oil pump, timing gear, and timing belt cover! also the ditribuitor, I did already on my 97 Geo , using a 95 motor and it work perfect! sounds complicate but is real ease!


Where on a 1995 Geo Metro is the IAT sensor?

connected to the air cleaner housing


Geo Metro crank sensor location?

LOL, some dont have crank sensors my friend! if you dont have a crank sensor by your oil pan then you have a bad distributor sensor!


Diagnose Fault Code PO134 1997 Geo Metro?

O2 sensor CKT No Activity (Bank 1 Sensor 1)


How do you work the front camera on the metro admire?

I own a admire. And it does.not. The thing on the front is a censor


What is the best place to buy a Metro PCS phone on Black Friday?

Metro PCS is the best place to get a phone on Black Friday. You could even get them from Walmart. Walmart has been selling Metro phones for a while now.


Where on a 1992 Geo Metro is the IAT sensor?

on a 3 cyl.metro,the iat sensor is found on the air cleaner housing towards the rear of the assembly


How do you install oxygen sensor for Chevy Metro?

you gotta take the old one out first


Where is the camshaft position sensor located on a 96 Geo Metro lsi 4cyl?

It is in the diistributor.


Where do you find the crankshaft position sensor on a 98 Chevy Metro?

Hi there, You can find the Engine Crankshaft sensor for a 1998 Chevy Metro in the bottom front of the oilpan. Note, it goes thru the oilpan but, it's Not part of the oilpan or in the "oil chamber" itself. It's held in place with two (2) bolts. No oil will come out when you remove it. There is one (1) electrical connector on the sensor. Note, this can be easily mistaken for the oil pressure sensor. Note, they are prone to getting "dirty", so clean it off after removing. Good luck. John


Is metro PCS in the Black Friday sale?

Yes


How metro train works?

The Metro Train, or Metro Rail, is the second busiest rail system in the US. The rail lines are color coded, which makes it easier to identify the lines.


Is metro pcs open on black Friday at midnight?

After calling Metro pcs from my phone I was told that there stores will open at 9am on black friday. expect it to be very busy as metro has most new phones buy one get one free!