the cap should be marked .cylinder one goes towards the back of the intake at about seven o'clock if you are looking at the distributor 1-8-4-3-6-5-7-2- firing order cyl 1 drivers side front.number 2 pass front
The marked # 1 position on the distributor cap faces to the FRONT and center of the engine
# 1 on the distributor cap faces to the FRONT / CENTER
#1 on the distributor cap of a Dodge 360 faces to the front - inline with the center of the engine ( according to the picture in my Chilton repair manual )
The marked # 1 position on the distributor cap faces to the FRONT / CENTER
There should be a mark on the distributor or it's switch plate that indicates where the rotor should point for cylinder 1. If you look at the distributor from the front of the vehicle, the closest center position should be for cylinder 2. Clockwise 1/8 th turn from that should be cylinder 1 position, but double check against the indicator mark that should be present.
Facing your engine, on the right side and closest to the radiator.
Inside the distributor.
There should be no way for transmission fluid to be getting into a cylinder on a DOdge 360.
Clockwise.
On a DODGE 360 cubic inch V8 engine : firewall 8 - 7 6 - 5 4 - 3 2 - 1 front
It is the front driver side cylinder.
dodge 360 getting fire to coil none from dist