The Toyota 20R engine crankshaft bolt torque specification is 150 pounds. The crankshaft bolts should be torqued in 50 pound intervals.
hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts
what are the torque for camshaft and cylinder head bolts please
No-one in the world knows
90 ft. lbs. and put sealer on the bolts
nope. you still have the 6 18mm bolts that bolt the flywheel to the crank
Head bolts and outer mains are 65 ft./lbs., inner mains are 70 ft./lbs.
Bolt pattern and torque specs are here: http://toyota.offroadforum.cz/aarc.epnet.com/application/8578/8578R03_Cylinder_Head.html
It depends on the brand of the rod bolts, but usually 45-50 ft/lbs.
65 ft. lbs. inner 70 ft.lbs. outer
remove driver manifold/egr pipe / remove starter - rotate engine with 19mm deep socket to the crank to find bolts
Torque settings for yamaha banshee
There are bolt all over the crank and they have different torque values. Here are a few. Crankshaft main bearing cap bolt - 36.5 - 41 .O in. lbs. Crankshaft pulley bolt - 7.5 - 9.0 in. lbs. Crankshaft timing belt pulley bolt - 47.5- 5 4 . 0 in. lbs.