just be sure they are tight i would guess around 20-30 ftlbs
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
Torque specs for brake caliper bolts 2005 mazda 6
Front caliper bolts 25 ft/lb Mounting bracket bolts 80ft/lb
32ftlbs for the pin bolts
The caliper mounting bolts, both in the front and in the rear, require 39N-m, or 28.9 ft-lbs of torque.
For the Chevrolet S-10 model years from 1982 to 1993, the torque for the caliper mounting bolts is 37 ft. lbs. The torque setting for the brake hose-to-caliper bolt is 32 ft. lbs.
33- Ft lbs.
75 ft lbs
70 ft lbs
18-25 ft lbs.
155 ft. lbs. They are stretch bolts so you SHOULD replace them everytime.
I believe that caliper is held with 10mm bolts. Remove caliper, then caliper mounting frame, then rotor will come off.