The fuse for hazard and signal lights on the Nissan Serena is in the fuse box, bottom row. The flasher fuse for hazard and signal lights is located in the dash just to the left of the radio.
bad fuse or hazard switch
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
you need to change the flasher can for the signal lights
it dont have lights
Yes, they are separate and different.
Check the bulbs Check the flasher
it called your turn signal is on
It needs checked out but both the hazard and brake lights go through the turn signal switch.
The whole turn signal arm unit needs to be replaced
You're going to have to change the hazard light button on the dash
Turn signal bulbs and hazard bulbs are the same bulb. When the turn signal is turned on, the indicator light on the dash flashes in tune with the turn signal. When the hazard lights are turned on, an extra fuse which is live, powers the hazard flashers, even if the car is turned off.
Turn signal flasher?
You could have a blowen fuse or a faulty connection!
Your car has two flasher relays. One for the turn signal lights and one for the hazard lights. Replace the one for the hazard lights. Any auto parts store can tell you the location and sell you a new one.
The hazard switch and the turn signal and brake lights are all incorparated, chances are the 3-1 switch is broke internally check all fuses
The switch must be shot. What kind of vehicle is it?
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
Check the Hazard warning switch
it could be a bad relay
It probably has 2 Flasher Relays. One for the hazard lights and one for the turn signals. Replace the turn signal flasher.
It's attached to the back of the hazard light button.
Your problem very well could be the hazard switch. i have a 1994 honda civic too i found whenever i disconnected the hazard switch from the wiring harness my turn signals brake lights and of course hazards do not work. Maybe replace the hazard switch..
Sounds like a blown fuse and/or faulty turn signal relay
dealership recall hazard flasher relay