If it's an auto trans the color should be bright red, if it's not it needs to be changed. If it's a Mitsubishi auto trans (most are) it needs SP-III ATF ONLY! Do not use Dexron ATF (also bright red in color) - it is not compatible.
The pan (usually black in color) on the bottom of the transmission serves as a reservoir for transmission fluid. Keep in mind that that it holds only about half of the total transmission capacity.
left side of the engine bay kind of a yellow color its labled on the lid
http://www.modifiedlife.com/2001-hyundai-accent-car-stereo-radio-wiring-diagram/
how to improve a weak motor on a 2000 Hyundai accent These engines are very prone to losing power if the plugs are not gapped correctly. So, if you have 100,000 miles or so on the engine start with new plugs. As you remove the old plugs check them to see if they are a clean grey color indicating that they are firing correctly. If the plug is black it means you have a bad wire or coil to that plug. Good luck
Transmission fluid should be a nice burgundy red color. If it is brown or black, this is a sign of transmission trouble. If the fluid smells burnt, the transmission will probably need replaced.
I like your accent! This color will accent that color.
It is yellow in color and hidden under the hoses on top of the transmission close to where it joins to the engine.
The best accent color for red and purple is blue!
The dashboard color of a Hyundai Elantra depends on the color of the interior. There are several choices available, but the most common color seen is black.
The engine block was Yellow, the valve covers were Argent, the air cleaner was Black, and all accessories were Black. Transmission was Black as far as I know, but I am not 100% sure on the transmission color.
Well, how to use color accent in Canon ixus 220 hs? Go in color accent mode and then press MENU button and hold it for a 2 seconds, you will enter in "color pick" mode, pick the color and enjoy!
"mi" isn't a color, it's "My" or, if with an accent, "me"