If you only have two speakers in your 106, there will be four wires on the plug for those, if you have 4 then there will be eight! The speaker wires are on the outside of the plug. On one side the right speaker wires are found, on the other the left. That will leave you with five in the middle. To find out what all of these do you will need a multimeter. Set it to the V (voltage setting) and connect the black lead to some exposed metal (when I did this I used the bolts holding the door on). Now, with the ignition off test all of the leads for power. One of them will give a reading of around 12v, the others nothing. This is the permanent or memory supply. Now turn on your ignition. At least one more wire will now also read 12v, this is the lead that actually provides the power for the stereo. Now turn on your headlights, a wire that had previously read 0v should now also read 12v. This is the illumination wire, and it makes the radio light up when your lights are on. Only one wire should have no reading on it by now. This is the negative (earth) Hope that helped!
how do i hardwie a touch screen radio
color code of car stereo wiring
What is the color code for car stereo model 16120514
What is stereo wiring color code for 2000 Toyota tundra?"
The wiring color code for a Clarion 7770 stereo is red and black.
what are the stereo wire color codes for a 2002 Chevy impala LS
Car stereo wiring color codes for a Mustang can be seen on a diagram. The diagram may be found in an owner manual or request from the stereo company.
color codes for wiring on factory stereo on 2008 Nissan sentra?
Go here http://www.modifiedlife.com/1988-chevrolet-caprice-stereo-wiring-color-codes/
== == == == == == == ==
black
red