FIRST thing I would do is remove the bulbs and check the PLUG slots for any sign of corrosion. This is a popular problem. Try and clean each slot on the plug with a small nail file or emmory board or even small piece of sandpaper. ALSO check the back of each plug to make sure there are no broken orfrayed wires and all three are securely conected to the plug. HOPE THIS SOVLES YOUR PROBLEM-GOOD LUCK!
next at the battey 7.5 apm
I own a ford f150 and my tail lights are not working, but my brake work. What could wire or what could be causing that.
The 2002 Cavalier has a reverse light switch. The switch can be bad, or have a loose connection causing the lights not to work.
They are a compleat circuit if one light is bad it will not work
signal lights not working.
get a wiring schematic for the Aeromacchi mini bike...same thing
Probably the bulbs are burned out, or the sockets that hold them are not properly seated causing a grounding problem. FriPilot
check your ign. fuse. sounds like the starter cylinoid, but first make sure the battery is not dead(good head lights)check connections for corrosion and snug fittings. the cylinoid is located on the starter.the red wire from the battery goes to it.the problem could also be in the switch.to find where the problem is you will need to test power to the s termanal at the cylinoid with the switch in the "start position" if you have voltage when trying to start will indicate a bad cylinoid no voltage at start is a bad switch or wireing to the starter.
If a Passat 04 TDI's indicator lights are not working, check the fuse. A blown fuse can cause the lights to stop working.
crown Victoria blower not working and head lights.
my lights are not working when i changed the pads on my peutgeo partner van
You may have a burnt out bulb that is causing your tail lights and dash board lights to not come on in your 1992 Bonneville. It can also be a blown fuse that is causing your problem.