A full set of tools, including a torque wrench. Make sure your torque wrench is calibrated before you try to use it.
Beyond that you need a gasket set and a machine shop to resurface the head for you. Don't try to put it back together without resurfacing the head.
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.
Yes. 20.99 at autozone for me yesterday, they are torque specific so they need to be replaced.
You will need to remove the cylinder head from your 1994 Chevy. Remove the head gasket and clean the surface. Put the new head gasket on and put the cylinder head back to its original position.
how tight should we tight the head gasket bolt for a ford f150 Need to know the engine size.
A head gasket set and new head bolts.
You either need a head gasket or intake gasket.
hi if you replace the head gasket you will need to have the head repaired and machined as the head alloy eat's out which causes the gasket to fail
Yes, the exhaust manifold on a 99 Chevy S10 2.2 will need to be be removed during the blown head gasket repair.
To change the head gasket on the 1997 Honda CBR 600F3 motorcycle you will need the service manual.
you can find them on autozone.com, in the repair guides section,complete with pictures
It depends on if you have been driving it with a bad gasket. Most garages will have to send out the head to be tested to make sure it is not warped. I had a cracked head gasket but the head did not need to be machined. The repair cost me $750.
i need the firing ordere for 4.0 BMW