You use a torque wrench for tightening bolts to an exact pressure. This is particularly important in things where many bolts must all be the same tightness, such as cylinder heads in engines, and parts of transmissions.
Yes, you can use a torque wrench in both directions.
Use a torque wrench that is graduated in ft. lbs or do the math.
A torque wrench, usually a power torque wrench
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
You don't use a torque wrench to loosen ANYTHING. -It is only for tightening nuts and bolts to the correct torque.
No
An Impact wrench is for a totally different use. A torque wrench will let the user know when a certain torque has been achieved in tightening. The impact wrench is for removing very tough nuts under impact of a hammer.
After torqueing I would use a regular ratchet with the angle gauge so you don't damage or through off the torque wrench calibration.
spanner or a torque wrench
yes
Use a torque wrench with the correct setting for your motor. See related link.
The socket wrench is one among the system of wrenches that departs the wrench handle from the wrench that engages the fastener. Whereas, the torque wrench are the torque indicating socket wrench handle. When it is used properly, that could help you calculate the torque amount while fastening using the wrench. It also limits the amount of torque which is applied on material.