my 'oo has a lot of indicators symbols in the instrument panel..
Brake-(O)with an explanation mark in the center of O means Brake system warning light.
Person with a seat belt on means Seat belt reminder Light.
Battery-looks like a battery means Discharge warning light
Oil looks like a oil can with a drip means Low oil pressure warning light
Check engine looks like a engine that has CHECK under it means Malfunction indicator lamp.
Gas pump means Low fuel level warning light
ABS(O) has abs in the circle means Anti-lock brake system warning light
Car with front doors open means Open door warning light
Person sitting in a seat with a seat belt on and big balloon means SRS warning light
A/T P means Unengaged "Park" warning light
A/T OIL TEMP means Automatic Transmission Fluid temperature warning light
Windshield washer looks like a window with wipers means Low windshield washer fluid level warning light
AIRBAG OFF means Passenger airbag off indicator light
<-- --> arrows means turn signal indicator light
=D means Headlight high beam indicator light
O/D OFF means Overdrive -off indicator light
P R N D 2 L means Automatic transmission indicator light
Hope this helps "00Tundra lady driver
Surely you know what some of the lights mean. Be more specific.
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
possible the battery is not grounded correctly?
my dash lights blink and dim when braking/found t this was a ticoverter that rusted
How do I replace the dash panel lights on a 2001 toyota sequoia?
The 2003 Toyota Tundra OBD 2 port is under driver side dash above accelerator pedal
Same fuse as tail lights
please tell me how to reset the computer on a 2008 5.7 Toyota tundra. all my dash lights are on. thanks, Patrick ANSWER: all you have to do is remove the positive terminal on your battery and that should work. but be carefull while doing this as you should remove the ground first to prevent shocking/shorting.
sol
A bad relay switch could be the culprit if dash lights remain on after engine starts in a Toyota. Cold weather can also cause these lights to stay on after the engine starts.
Because you have a very optimistic car.
The dash lights on a 93 Toyota 4Runner are replaced by removing the dash trim and panels. When the dash internals are exposed, the individual bulbs can then be replaced.