if it is hard to press on the brakes it usually indicates that you have a malfunctioning brake booster. Since brake boosters are vacuum assisted, it could also be that you have a disconnected vacuum hose or a leaking hose.
to not let go at the brake pedal once you press it.
If you mean when you are coming to a stop, and press on the brakes, you feel a vibration- this most likely means that your brake rotors are warped and need to be turned. If you mean you are already at a full stop, in idle, and you press the brake and feel a vibration- it may mean a vacuum problem in the engine or something like that. So it depends- is it your brakes vibrating, you feel it in the pedal? Or is it your engine suddenly running rough and the whole front end of the car shakes?
Go get your breaks checked out. You may need new breaks.
You probably need new brake pads very soon.
Brakes are designed to stop things from moving, therefore making it difficult to move a bike that has its brakes on.
press the brakes and then press the start/stop button
you should gently press the brake pedal and gently press the gas pedal, the increase friction will dry the brakes.....
i ment that if the sensor in the dash stays on after i press the brakes and dosent go off till i turn the car back on and dont press the brakes?
Press brakes with firm, hard pressure.
Press brakes with firm, hard pressure.
You have a warped rotor.
to accelerate press and hold the Page Up button. if it doesn't move or if it moves slowly press Shift B to release brakes. this works for jets but for props you press { 3 times then press S. Then you release brakes and press page up.