Want this question answered?
Bad switch? Bad hazard flasher?
It could be the turn signal bulbs, some vehicles use separate bulbs for the hazard and turn signals. It could also be a bad switch or wires for the turn signals.
Dimmer switch
There are two different flashers on vehicles. 1 for the turn signals, 1 for the hazard flashers.
you might have a bad Flasher relay.
Faulty hazard lights on a 1994 Acura Integra can be fixed by replacing the hazard light relay or the defective bulbs. Hazards are used to notify other drivers that the vehicle is in distress.
my turning signals dont work on my 91 integra LS. They were working a day before. so the next day they werent. I also had battery problems but i had checked every single fuse and the fuses arent burn. My turning signals do not work what so ever.
More than likely the flasher relay is defective. Replace it.
Acura dashboard light don't work
When changing the corner lights on a 1992 Acura Integra first find the housings for the corner lights. Pull the old lights off and replace the bulbs.
where is the fuse box located on a acura
The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.