Use ammonia based cleaners. But a razor blade works too
Some do but most do not. Though alcohol is a great cleaner itself, It cannot remove all the things that a bowling ball picks up.
To remove sticky residue from leather, take plain dish soap and a wet rag. Add a dab of the soap to the rag and scrub away the residue.
By making use of the abrasive polish, you will be able to remove the polish residue. After the old silver polish residue has been removed, its polishing is very important.
To remove grease from the headboard get a cleaning agent that has a degreaser in it. Some cleaner that have degreasers are scrubbing bubbles and awesome orange.
Remove the air cleaner and air box. Disconnect hoses and mark them so you know the proper reconnections. Remove the nuts and bolts holding the carburetor to the manifold. Remove the old gasket with a scraper and clean any remaining residue with degreaser. Clean the degreaser off completely. Apply gasket sealant to both sides of the new gasket and apply in place of the old one. Repeat the process in reverse order to place the new carburetor. You'll never see a carburetor installed from the factory with sealant. It's not necessary, and can cause problems if any of the sealant gets into the intake tract.
that's easy
swallowing.
The best thing to use to remove aerosol residue from a vinyl floor is baking soda and water. Lemon juice can also be used.
The best way to remove a sticky residue from plastic is to use a gentle emulsifier. A gentile antibacterial soap and a soft bristle brush can normally get rid of a sticky residue.
You can remove sticky label residue with simple cooking oil, a soft cloth and a little rubbing.
The ingredient in glossy paint is acrylic. You cannot remove that ingredient.
clean the article of clothing