There are lots of penetrants (lubricants designed to help loosen corroded or rusty connections) out there, and all make big claims when it comes to getting things apart. Is there any difference between any of them? There are lots out there -- PB Blaster, WD-40, Liquid Wrench, Goeey Booey -- but are they all the same or do any stand out?
Why PB Blaster?Why PB Blaster, you ask? Heck, we have no idea. Do I look like a chemist? Whatever's in it, PB Blaster can really get the job done. We've used lots of juices to try to get things loose, and nothing seems to measure up to PB. It works better and faster, and longer, than the other stuff we've had around. Soak a rusty connection and let the juice do the work. PB Blaster will eat deep into the rust and corrosion to help free the nut or bolt. To really rock it, combine PB with a blast of heat from a small torch and you're sure to have things freed up quick.Added 5/20/10 -- I personally work for the Advertising Agency for B'laster Corporation and the PB in PB B'laster stands for Penetrating B'laster.
PB blaster spray and a vice-grips PB blaster spray and a vice-grips
PB Blaster Homie ..... lol
Air tools and PB Blaster.
Try running the engine to get the manifold hot, then try to have at it. You also might need to use PB Blaster or equivalent to get it unstuck. Make sure that there aren't any parts involved that the PB Blaster would eat away at.
Use Lots of PB Blaster and try to push it or pull it out.
your automatic chock is getting stuck!use some pb blaster on it!
PB blaster and a sludge hammer. If that doesnt work, heat it up and sledge hammer.
Use WD-40, or pb blaster. Becareful if you use a torch, like propane.
Spray them liberally with penetrating oil (I'm partial to PB Blaster, personally). If that doesn't do it, cut them off... you can use a torch if it is safe to do so, or a grinder.
Try spraying some WD-40 on it. PB Blaster works great also, Mike
PB blaster is an amazing substance. Spray it in the adjusting hole and wait about 15 minutes. It'll pop right off.
The best way to remove the rear axle on a Polaris Hawkeye is to spray it with PB blaster. After waiting several hours or a day, simply pull the axle outward.Ê