Airbag code 19 indicates that the RCM has detected a circuit problem with the driver's side airbag circuit. That might mean a connector or a clock spring fault or the airbag or RCM has failed electrically. It is STRONGLY recommend to leave airbag system repairs to someone with the proper training and equipment as it can be hazadrous to your health to try and repair it youself.
You have to remove the passenger airbag and use a flash light and read the 5-digit code then try that code on the keyless pad.
You will need to remove the passenger side airbag. It is located on a plastic box and it will be labeled on the top. You will need a small mirror to read the code. It will be a 5 digit code right next to a bar code. Hope this helps.
On my 2001 sport trac it is behjnd the backseat on the module
The light will reset itself when the cause of the code has been repaired.
Each vehicle has it's own factory keyless entry code
the code p0304 is cylinder 4 misfire detected
You need to see what the code is. Most likely it is an O2 code or EVAP code both are very popular on that model. or... there is a crack (or cracks) on your gas filler neck (usually near the gas cap) and the computer is detecting that gas fumes are leaking. That's what the code was on my 2001 Explorer Sport.
The Airbag Code 36 for a 2001 Ford Taurus is the airbag code for the Driver Side, Side Airbag. This means that there is either a faulty connection, and wires may need to be cleaned, or that the driver side, side airbag needs to be replaced.
The # 3 engine cylinder has a misfire On a 2001 Ford Explorer Sport Trac the engine cylinder locations are numbered firewall 3 - 6 2 - 5 1 - 4 front of vehicle
Code 21 indicates ECT out of self-test range
error code o0125 ford explorer 2002
Trouble code P1120 means: Throttle Position Sensor A Out Of Range Low (Ratch too low)