In most cases it is a plastic hose usually made of unvulcanised rubber
The best way to clean a plastic hose for a fish tank is to use pipe cleaners, depending on the width of the interior tube you may be able to use a rag as a pipe cleaner type tool and just spin the rag through the hose until it is clean.
Polymers in the home can be (but is not all inclusive):Most man-made fabrics; (rayon, nylon, etc.) curtains, clothing, table cloths, carpet, etc.Most household plastics; trash cans, trash bags, plastic containers, plastic cutlery and plastic plates, plastic drinking cups and glasses; etc.Toys - most plastic toysCDs, DVDs, Computer's, Appliance's, Car Parts, Water Hose and Sprinklers, etc.
Plastic.. Depends what type, but plastic pipes are made from plastic. :)
On top right in front of the fuel injector closest to the firewall. Has three hose connections. Big hose on top, little hose on the side and a medium hose on the bottom. Take off the little side hose first since the fitting breaks off easily. Then pull out of the bottom hose and top hose. Clean or replace.
no, plastic is made out of oils usually petroleum.
You have to buy flexible plastic hose, there is no way you could make it, even with the correct materials.
Usually plastic nowadays.
The Chevy heater hose removal tool is a plastic piece that clamps around the hose. The tool slides into the fitting to release the hose.
Looking at the top drivers side of the radiator there will be a hose coming out between the power steering reservoir and the drivers side battery. The hose will have have plastic ends on it and it will lead down behind the EGR cooler. To release the hose you'll have to pull the metal rings out of the plastic fitting on the hose. The other side of the hose will not be easy to get to seeing how its behind the EGR cooler.
follow your big bottom hose coming from your rad,its in the plastic fitting where the hose is fitted on
Yes, "hose" is a common noun. It refers to a flexible tube made of rubber or plastic that is used to convey liquids or gases.
You can purchase plastic hose clamps online at home improvement websites such as Lowe's, Amazon, and Pet Store. You can also purchase them from personal sellers at websites such as eBay and Craigslist.
That is the vent hose for the vaccum shift system for the front axle.
Just right of the engine its plastic...it has a small hard plastic hose coming out of the top of it
If it's the larger hose(pressure hose) it has to be replaced as a unit. The smaller(return hose can be pieced together with a plastic barb.
It sounds like you need a new hose. They are just plastic and age and weather ruins them with time. If that is not the case, you may have the wrong sized hose.
The small black (either rubber or plastic) hose attached to your cars blower motor is a cooling tube for the blower motor.