a mix of 50:1 for each Gal. to make it easy, go to a bike shop near you and get you a mixing cup. I always use a mixing cup, "always".....
The blaster 200 is a 2-stroke, therefore you need to mix the gas and oil, trying running a 50:1 ratio, 50 parts of gas to one part of oil.
i have a 1985 Yamaha yfm 200, it is gas, no fuel/oil mix needed. just put in 93 octane. unless u have a 2 stroke then its usually a 50:1 or 40:1 mixture
Gap is .20 or .30 depending on fuel mix.
the correct oil mixture is 40 to 1 or if you want you can mix to 50 to 1
20:1 oil mix is recommended
50/50 mix. 50% correct type antifreeze and 50% distilled water. Do not use tap water.
If you put in to much oil it will smoke really bad, or will not run. If not enough oil you will damage motor.
i always use 32.1 mix in mine
If your talking about the pancake mix in a can, it costs about $4.
It would be wise to.At 32:1 ratio
None, never heard of a two stroke arctic cat ATV
You don't. You can remove pump and pre-mix the gas.