Loosen the tensioner/ Idle pulley on the lower left of the front of the engine (when facing the car, below the AC compressor). The adjusting bolt for loosening the idle pulley to reduce the tension on the belt is easily access from under the car. Use a socket and ratchet driver or an adjustable wrench to loosen the bolt until there is no tension on the belt or until you can easily remove the belt. If the bolt appears to be rusted, spray some WD40 or liquid wrench to loosen up the rust. After spraying the bolt, let it soak for a bit then procede with what was previously mentioned. It is highly recommended that you obtain a Hanes automotive manual for the car.
It does not have one
It does not have a cabin air filter if that is what you are looking for.
$360-$450 for the compressor
A 2001 Intrepid does not have an oil change light.
how to change oil pressure switch in 2001 Dodge Intrepid I need to look at a diagram
The fuel filter 1995 dodge Intrepid is on the passenger side. The filter is towards the back of the car.
Probably the evaporator core has mould on it and needs to be cleaned.
1999 dodge intrepid is not starting I change crank and camshaft sensor and it stall will not start what can i do next.
Dodge Intrepid was created in 1993.
1999 dodge intrepid rear windo don't know working i change 2 time same place you can Email .e sunilpatel2002@hotmail.com
dont have a clue :)
How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.