0
Add your answer:
Earn +20 pts
What is the firing order for a 1986 Mazda B2000?
firing order is 1, 3, 4, 2 for a 86' B2000
Why does your Mazda b2000 86 not have pressure in the clutch pedal?
No fluid in the master cylinder
How much horsepower does your 1986 Mazda B2000 have?
The 86-89 B2000 put out 86 hp @ 4800 rpm and 120 ft-lbs @ 2800 rpm. See the attached link for additional specifications.
What car can you get a turbo off of to put on an 86 Mazda b2000 2.0?
The exhaust manifold and turbo from the 88-92 Mazda 626, MX-6, and Ford Probe turbo models will bolt onto the 86-93 B2000 and B2200. See the attached link for additional information.
What is the spark plug gap for 86 Mazda B2000?
0.031 thousandths with spark plug gap tool or just plain 31 as I go by.
What are the torque specs for the head bolts of a 1986 Mazda B2000?
For the 1998cc, from the AllData manual "copy": 80-86 N-m (59-64 ft-lb).
What engines fit in an 1989 Mazda B2000 does the 2600 fit on b2000 s gearbox?
Engines for the 86-89 B2000 and 86-93 B2200 are bolt in swaps. The short block from the 1st gen Ford Probe, and the 88-92 626 and MX-6 is the same, just bolt on you're cylinder head and accessories. Although I believe the B2600i has the same engine mounts the bell housing does not match and is not easily swapped. Mazdatrucking.com has additional information
Where is the thermostat on Mazda b2000?
On an 86-89 B2000 the thermostat is near the front of the engine in between the alternator and upper timing cover. Follow the upper radiator hose towards the engine and you will see a small housing with two 12 mm fasteners. Behind it is the thermostat. Mazdatrucking.com has tech info and diagrams which may help.
Ill the b2000 fit in the b2200?
Yes, the 86-89 B2000 engine will bolt into the 86-93 B2200. There are two mounts that go from the engine to the transmission on either side, you'll need to transfer these from the B2200 engine onto the B2000 engine. You will also need to keep the lower radiator hose from the B2000. Mazdatrucking.com has additional information on engine swaps as well as forums.
Fuel capacity of a b2000?
I'm pretty sure it's 15 Gallons, I just bough an 86 B2000 and the specs online said 15 gallons.
Where is the oil pressure switch located on a 86 Mazda b2000?
usually next to the blinker fluid reservoir unless its turbo then its under the flux compasitor relay unit thingy
What is the point gap of a 1987 B2000?
Apparently you have NO clue that the truck has electronic ignition! Meaning the truck does NOT have points!It has a rotor button,and ignition module.Points have not been used on the for years and the 86-93 Mazda series are all electronic ignition. I own a 89 b2000 and the point gap is 0.45-0.55 and it DOES have points! I can take a photo for you if you like? So they are NOT all electronic ignition!
